Manual teeth setter for band saw blades RWM/RWS/RWV
The teeth setter is used for setting the band saw blades in […]
Teeth setters for circular saw blades R-CZ and R-CZ E
The teeth setter is used for setting the circular saw blades. Two models are produced – the manual R-CZ and with electric drive R-CZ E. In manual type R-CZ the pressure is transmitted handy by lever. In electric type R-CZ E the work of bending is made by engine. Big leverage allows for setting the teeth of even very thick saw blades with both the electric and manual model. Thanks to innovatory technical solution the saw blade is being clamped and the teeth are being set at the same time with using only one lever.
Technical data
| The diameter of the saw blades | 300-1100 mm |
|---|---|
| The thickness of the saw blades | up to 5 mm |
| The size of the opening | up to 1.2 mm per side |
| Pitch of set teeth | 15-80 mm |
| Height of set teeth | any |
| Installed power (R-CZ E model) | 0,55 kW / 400V |
|
Total weight: - manual - electric |
with base 65 kg without a base 30 kg with base 73 kg without base 38 kg |
Instructional videos
R-CZE
R-CZ
Also check
Manual teeth setter for frame saw blades R-T
The teeth setter is very easy to operate and failure-free. When pressing […]