Manual teeth setter for band saw blades RWM/RWS/RWV

The teeth setter is used for setting the band saw blades in fast and easy way. Teeth are set manually by pressing the lever. The return move of the lever moves the saw blade by the next teeth and the cycle starts again. The cycle and size of setting is adjusted depending on the kind of blade, for e.g. band saw blades are set in cycle: one tooth straight and two teeth deflected. In one cycle two teeth are being set to the opposite sides at the same time and next one tooth is being moved as straight tooth.

Technical data

Set size: up to 1.0 mm per side (in the RWV model: 0.3 to 0.5 mm)
Accuracy of setting: +/- 0.05 mm
Work speed: 70 teeth / min
Saw width: 15-100 mm
Tooth pitch: 8-50 mm (in the RWV model: constant 22 mm pitch)
Tooth Height: 5-15 mm
Thickness of saws: to 1,2 mm
Total mass: - with a stand: 65 kg
- without a stand: 35 kg

Instructional videos

RWM sent from the customer for repair



Also check

Teeth setters for circular saw blades R-CZ and R-CZ E

The teeth setter is used for setting the circular saw blades.

Manual teeth setter for frame saw blades R-T

The teeth setter is very easy to operate and failure-free. When pressing […]